Getting around OpenBMCS. The one course everyone takes first: signing in, the dashboard, the shared module layout, your home location, tables and export, site-wide search and help, pointing at a controller point, and what to do when the system says no. No permission level required.
Responding to and configuring alarms in OpenBMCS: the alarm dashboard and its five bell states, the acknowledge-resolve-comment loop, bulk actions, alarm history as evidence, editing and creating alarms (boolean, range, enum and history-summary), folders and templates, and notification routing by email, SMS and pager. Builds on Foundations.
Recording and reading trends in OpenBMCS: what a history is, reading a graph and its excursion shapes, time ranges, exporting images, PDF and full-resolution CSV, creating and editing trends, templates that propagate, editing history values with a recoverable bin, and the unattended cleanup that permanently deletes trend data. Builds on Foundations.
Managing the controllers a building runs on: the device register and online state, adding and commissioning controllers, BACnet discovery, layered diagnostics, defining points that other modules bind to, backups and restore, replacing failed hardware, the connection log, virtual controllers, the Modbus points workbench and working with a BACnet device. Builds on Foundations. Reachable at Full Access.
Reading and operating the Programming module — the visual wiresheet onto a Sedona controller's live logic. What blocks, slots, links and live values are; navigating the controller and object trees, the minimap and the Points List; reading data types and config-versus-wired slots; the polling that keeps the sheet current; the read-only Flow View; changing a single slot value with the two-stage live-edit-then-Save-to-flash persist; and an honest map of the buttons that are view-only or not yet finished. An operate-and-read course, not an authoring course. Builds on Foundations.
Managing people and their access in OpenBMCS: reading a permission set, the relative-permission rule, creating and duplicating users, the Access Options dialog where permission level and home location are set together, folder-level templates, the boundary between Full Access and site administration, and account hygiene — including the calibration-grant trap. Editing access requires Full Access in the Users module.
Installing a new OpenBMCS site from the miniServer v3 appliance: what is in the box and what you need before you start, the two-page browser install — Configure Device to get the appliance online, then Install Server to register the licence and create the site login — watching the install run, the first login, what to commission next, and what to do when the install will not proceed. A commissioning-technician course; no site permission level is needed because it happens before the site exists.